■ Install the SmartChip and battery
Always switch the device off and disconnect the charger before removing
the battery.
Keep all SmartChips out of the reach of small children.
For availability and information on using SmartChip services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
This device is intended for use with the BP-6M battery.
The SmartChip and its address book can easily be damaged by scratches
or bending, so be careful when handling, inserting, or removing the card.
1. With the back of the phone facing
you, slide the back cover to remove it
from the phone (1).
2. To remove the battery, lift it as
shown (2).
3. To release the SmartChip holder,
gently pull the locking clip of the
card holder, and open it (3).
G e t s t a r t e d
13
4. Insert the SmartChip into the
SmartChip holder (4). Make sure that
the SmartChip is properly inserted and
that the gold-colored contact area on
the card is facing downwards.
Close the SmartChip holder, and press
it until it snaps into position.
5. Replace the battery (5).
See “Nokia battery authentication
guidelines,” p. 87.
6. Slide the back cover into place (6).